Support & Resistance Pivot Calculator for Beginners

Posted by James Hughes -
Scope Markets

Table of Content

Support and resistance are common terms in online trading. They are the part of assessing graph patterns, traders can use these pivot points to consider price levels on graphs that have a tendency to act as obstacles, stopping an asset’s price from getting forced in a definitive way.

Support takes place when declining prices hold, reverse path, and start to grow. It is often seen as a platform that is sustaining prices.

And, resistance is a level of price where growing prices hold, reverse way, and start falling. Resistance is usually seen as a cover that holds prices from going higher.

If the prices cross the resistance or support levels, the prices surge to the next resistance or support level.

These levels are not always accurate; they’re generally an area including a small variety of prices.

Thus, a trader can breach these levels without getting broken. As an outcome, support or resistance levels assist in checking probable points where the price can change ways.

Major vs. Minor Support or Resistance

Minor support or resistance holds increasing or decreasing prices within a bigger market tendency.

Whereas major support or resistance completely prevents either increasing or decreasing prices and the more general market trend shifts direction.

Additionally, minor price support or resistance is a different straight line showing a region, which before assisted as price resistance or support, and has now changed to the other.

Let’s suppose, if it was the price before a support level, it is currently a resistance level.

How Pivot Calculator Helps Beginners in Calculating Support and Resistance?

Traders use these pivot points in both equity trades and commodities. These are measured according to different factors including price, former trading sessions, and more.

Also, traders can use pivot indication points to identify support and resistance levels in the present or forthcoming session. A trader uses the levels for finding entry and exit points to make more profits and applying stop-loss.

Types of different pivot points

First, the main pivot point calculation is done, then this point is taken to assess the different succeeding points.

Resistance pivots are those which are able the daily pivot and they are denoted by R1, R2, and so on.

If they are below the daily pivot, then they support pivot indicator points, known as S1, S2, etc.

They are basically calculated through a five-point calculation system. It includes the following pivots:

PP or center pivot point

2 resistance levels such as R1 and R2

2 support levels such as S1 and S2

What Are The Mid-Pivot Points

These points come between the pivot indicator points.

M1 is the middle point between S1 and S2.

The mid-pivot point amongst the S1 and the key pivot point is M2 and it proceeds in a similar order.

Calculate Pivot Points In Easy Steps?

When a price is there in the prediction, it shows the price of the early or previous period.

Formula for calculating the main pivot

Pivot point = (H + L + C) / 3

In this, H means the highest price, L is for the lowest price and C is for the closing price

The regular point is the key pivot point. And, all the different levels such as R1, S1, etc., revolve around this.

Pivot indicator points (above) regular pivot – Resistance lines or R1, R2, etc.

Pivot indicator points (below) regular pivot – Support lines or S1, S2, etc.

Calculating The First Resistance Level or R1

R1 = (Pivot point *2) – L

The Second Resistance Level or R2

R2 = Pivot point + (H – L)

Calculating The First Support Level or S1

S1 = (Pivot point*2) – H

The Second Support Level or S2

S2 = Pivot point – (H – L)

How to Calculate Mid-Pivots?

Mid-pivots are the points that fall between the key pivots. And, calculations for these pivots are:

  • M1 = (S2+S1)/2
  • M2 = (S1+PP)/2
  • M3 = (R1+PP)/2
  • M4 = (R2+R1)/2

Let’s understand this with an example:

Here we have taken values for FTSE trade.

FTSE has the highest price 6038.14, lowest price 6012.13, and closing price 6026.954 respectively.

Pivot point = (Highest price + Lowest price + Closing price) / 3

Pivot point= (6038.14+6012.13+6026.954)/3

Pivot point = 6025.7367

R3 = H + 2 * (Pivot − L)

R3 = 6038.14 + 2*(6025.7367- 6026.954)

R3= 6065.3533

S1 = 2 * Pivot – H

S1 = 2 * 6025.7367- 6038.14

S1 = 6013.3333

R1 = 2 * Pivot – L

R1 = 2 * 6025.7367 – 6026.954

R1 = 6039.3433

S2 = Pivot – (R1 – S1)

S2 = 6025.7367 – (6039.3433 – 6013.3333)

S2 = 5999.7267

R2 = Pivot + (R1 – S1)

R2 = 6025.7367 + (6039.3433- 6013.3333)

R2 = 6051.7467

S3 = L – 2 * ( H – Pivot )

S3 = 6012.13 – 2 * (6038.14 – 6025.7367)

S3 = 5987.3233

If the market price goes above the PP, R1 and R2 can be used as trade points.

If the market moves to R3, then traders may think of exiting the high position. Even changing the position if different technical indicators give a strong refusal trend.

This tool is helpful for traders to finding support and resistance levels. Other than these, this calculator is also useful in forex trading options trading, and more.

So, if a trader uses a pivot point calculator, then he can get the idea of trading and where the market is going throughout the day with only some easy calculations.

Utilize The Pivot Points For Day Trading

When calculating the pivot points, the point performs like the first resistance or support level. Increased volume trading usually takes place when the price is at or close to the pivot point. Here are the key trading tactics that a trader can use with pivot indicator points:

1. Bounces Technique in Pivot Point

If the price activity stops and bounces again before approaching the pivot point, then you must get into the trade in the way of the bounce. If you are checking the trade with cost over the pivot position, and the cost moves near to the pivot position and bounces again upwards, you must get into a long or buy trade.

But, if you are checking a pivot position from the weaker side and the price bounces again to the downward after getting the pivot, you must sell.

The trade’s stop-loss is located over the pivot position if there is short trade, and under the pivot position if the trade is extensive or long.

2. Breakout Technique in Pivot point

When the price activity breaks within the pivot position, like passing from below it to over it – the trade must stay in the way of the breakout. If the breakout is in a bearish position, the trade must be short. Whereas for a bullish breakout, the trade must be extensive or long.

The best place to integrate a stop-loss position is to the different sides of the pivot position. Let’s say, if buying a long position based on the price going above the pivot position, a stop-sell will be a bit under the pivot position.

Why Day Traders Prefer These Pivot Points?

Day traders usually choose to use pivot reviews over different technical pointers for many reasons. And, they involve:

1. Increased accuracy

The pivot point is one of the important symbols in the market. This illustrates why a large number of day traders like to use it to identify trade entry or exit levels.

It allows traders to enter the market to go after the entire market flow because it uses the earlier day’s trading activity to forecast the present day’s possible action.

2. Smaller time frames

Not like different trading tools that use longer time periods, the pivot point symbol gets data from a sole day of trading.

It considers the earlier day’s prices such as high, low, and close to identifying likely resistance and support levels.

Although pivot point trading is applied at the regular interval, pivots can also be assessed for much quicker periods, like hourly or fifteen-minute charts.

3. Simple to use

Pivot Point is a simple to use tool that has been used in many trading interfaces. The interfaces determine resistance and support levels. Thus, the trader doesn’t need to do it himself. After attaining the pivot levels, a trader may focus on finding out their method to trade for the day.

Uses of Pivot Points

1. Check market trends

When the price activity stays or goes below the pivot point, it represents a bearish market. But, when the price movement stays or goes over the pivot, it tells that the market is in a bullish position.

2. It guides individuals for entering and exiting the market

Traders may also use the pivot point method for making a decision about when to get in or out from the market.

Conclusion

Rather than its calculative ability, the Pivot Point Calculator is also helpful for identification purposes.

Its user-responsive platform shows the support as well as resistance levels for every pivot type sidewise.

In this way, traders can identify any variations in the incorporated price levels and improve trade-associated tactics very well.

References:

Money control – Global indices/
 
Easy calculation – Pivot points trading
 
Corporate finance institute – Pivot-points/
 
Enrich broking – Pivot point calculation method
 
Investopedia – Support and resistance basics
Share this article:

Disclaimer: This material is a marketing communication and shall not in any case be construed as an investment advice, investment recommendation or presentation of an investment strategy. The marketing communication is prepared without taking into consideration the individual investors personal circumstances, investment experience or current financial situation. Any information contained therein in regardsto past performance or future forecasts does not constitute a reliable indicator of future performance, as circumstances may change over time. Scope Markets shall not accept any responsibility for any losses of investors due to the use and the content of the abovementioned information. Please note that forex trading and trading in other leveraged products involves a significant level of risk and is not suitable for all investors.

Payment Methods

Scope Markets
Scope Markets
Scope Markets
Scope Markets

Awards

Scope Markets
Scope Markets
Scope Markets
Scope Markets

Scope Markets offers institutional and retail trading services to businesses and traders worldwide. Our top management team has more than 20 years of experience in the industry, and we are proud of the solid partnerships we built over the years. Whether it's a business or individual, Scope Markets has a wide range of trading solutions that are compliant, flexible, cost-efficient, innovative, and place the client first.

Contact Us

Registered address:
6160, Park Avenue, Buttonwood Bay, Lower Flat Office Space Front, Belize City, Belize

Email:
customerservice@scopemarkets.com

Tel:
+44 2030 516959

Risk Warning

Please note that forex trading and trading in other leveraged products involves a significant level of risk and is not suitable for all investors. Trading in financial instruments may result in losses as well as profits and your losses can be greater than your initial invested capital. Before undertaking any such transactions, you should ensure that you fully understand the risks involved and seek independent advice if necessary. Please read and ensure you fully understand our Risk Disclosure.

Legal Information

RS Global Ltd is authorized and regulated by the Financial Services Commission of Belize ("FSC") under the Securities Industry Act 2021 with registration number 000274/2.

Restricted Regions

Scope Markets does not offer its services to the residents of certain jurisdictions. Please read carefully our Restricted Countries document.

This website uses cookies to provide you with the very best experience and to know you better. By visiting our website with your browser set to allow cookies, you consent to our use of cookies as described in our Privacy Policy.

© Copyright 2022 Scope Markets. All Rights Reserved.